Contents
- Which of the following is an example of wireless networking technology?
- What are the different types of wireless services in 4G LTE?
- What are two main types of wireless networks?
- Which of the following is type of wireless communication?
- Which of the following 802.11 wireless networking standards support transfer rates of over 54 Mbps?
- Which of the following wireless network standards include MIMO?
- Which 802.11 standard operates in both the 2.4 GHz and 5GHz bands?
- What is the best wireless connection type?
- What is PPTP connection type?
- Is TCP a wireless protocol?
- What is the latest wireless protocol?
- How does 802.11 n work?
- Which of the following is a wireless technology *?
- What is LTE technology?
- What is LTE in mobile network?
- What is the access technique used by an LTE or LTE a network?
- Which of the following are the uses of computer network technology?
- What is the 802.11 protocol?
- Which type of wireless communication is based on 802.11 standards?
- What is WLAN and its types?
- What is 802.11 a/b/g/n AC?
- What is the difference between 802.11 n and 802.11 AC?
- What is the 802.11 g standard?
- Conclusion
Similarly, Which wireless Internet connectivity method that utilizes cellular technology?
Which of the following is a cellular technology-based wireless Internet access method? Correct. One of various cellular Internet connection technologies is 3G (third-generation) cellular.
Also, it is asked, Which of the following is a wireless network?
Cell phone networks, wireless local area networks (WLANs), wireless sensor networks, satellite communication networks, and terrestrial microwave networks are all examples of wireless networks.
Secondly, Which of the following is a scenario in which an IT support technician would most likely be required to implement the alternate IP configuration method on a network host?
Which of the following scenarios would need the use of an IT support expert to apply the alternative IP setup technique on a network host? The workstation will have a valid IP address on the network if a DHCP server is unavailable.
Also, What are 3 types of wireless connections?
Wireless networks are divided into three categories: WAN, LAN, and PAN. WWAN (Wireless Wide Area Network): Mobile phone signals are used to build WWANs, which are normally supplied and managed by specialized mobile phone (cellular) service providers.
People also ask, What type of connection is PPPoE?
PPPoE (Point-to-Point Protocol over Ethernet) is an Ethernet encapsulation of the Point-to-Point Protocol (PPP), which is often used with dial-up connections. Instead than being linked directly to the computer, the modem might be part of a network that numerous users can access.
Related Questions and Answers
Which of the following is an example of wireless networking technology?
Wireless Communication Types You may be acquainted with some of these terms: radio and television transmission, radar communication, cellular communication, global positioning systems (GPS), WiFi, Bluetooth, and radio frequency identification are all instances of “wireless,” with drastically diverse applications in some cases.
What are the different types of wireless services in 4G LTE?
4G standards that comply with IMT-2000 LTE Advanced is a faster version of LTE. WirelessMAN-Advanced or IEEE 802.16m Long-Term Evolution of 3GPP (LTE) WiMAX on the go (IEEE 802.16e) For the Chinese market, TD-LTE is being developed. UMB is an abbreviation for University of (formerly EV-DO Rev. C) Systems using Flash-OFDM.iBurst and MBWA (IEEE 802.20).
What are two main types of wireless networks?
Networks that are wireless WPANs (Wireless Personal Area Networks) are short-range networks that link devices in a limited area. WLANs (Wireless Local Area Networks) are wireless networks that employ radio waves rather than Bluetooth technology, like WPANs do.
Which of the following is type of wireless communication?
Wireless Local Area Network (WLAN) is the correct answer. WLANs are radio-wave-based wireless networks.
Which of the following 802.11 wireless networking standards support transfer rates of over 54 Mbps?
Which of the following wireless network standards include MIMO?
For wireless LANs and wireless communications, the IEEE 802.11n Wi-Fi standard incorporates technologies such as OFDM and MIMO to offer high-speed data at 600 Mbps peak.
Which 802.11 standard operates in both the 2.4 GHz and 5GHz bands?
Wi-Fi 6/802.11ax, which runs on both the 2.4 GHz and 5 GHz frequencies and is backward compatible with Wi-Fi 4 and 5, operates on both the 2.4 GHz and 5 GHz frequencies.
What is the best wireless connection type?
At short ranges, a 5GHz link will outperform a 2.4GHz connection. Because of the shorter wavelengths at 5GHz, it can’t go as far or transmit through certain things, while being quicker.
What is PPTP connection type?
The Point-to-Point Tunneling Protocol (PPTP) is a virtual private network implementation mechanism. A user may use PPTP to create a VPN connection to access services that are located in a different physical location. PPTP employs a TCP control channel and a GRE tunnel to encapsulate PPP packets.
Is TCP a wireless protocol?
The transport protocol was created with fixed end systems and wired networks in mind. Traditional TCP is characterized as a wired network, while classical TCP employs a wireless method. TCP is primarily intended for use in fixed networks and fixed, wired networks.
What is the latest wireless protocol?
How does 802.11 n work?
To broadcast and receive data, 802.11n employs numerous wireless antennas in tandem. The ability of 802.11n and comparable technologies to coordinate numerous simultaneous radio transmissions is referred to as MIMO (multiple input, multiple output). 802.11n can handle up to four streams at once.
Which of the following is a wireless technology *?
Bluetooth and WiFi are both forms of wireless communication.
What is LTE technology?
When compared to third-generation (3G) technology, LTE (Long-Term Evolution) is a fourth-generation (4G) wireless standard that delivers greater network capacity and speed for smartphones and other cellular devices.
What is LTE in mobile network?
The acronym LTE stands for Long Term Evolution, and it’s also known as 4G LTE. It’s a wireless data transmission standard that enables you to download your favorite music, websites, and videos considerably more quickly than you could with the previous technology, 3G.
What is the access technique used by an LTE or LTE a network?
The usage of multiple antenna techniques is another advancement of LTE systems. MIMO (Multiple-Input Multiple-Output) technology was used for the first time in LTE, making it the world’s first worldwide mobile cellular system. The use of numerous antennas may increase communication performance greatly by increasing channel capacity.
Which of the following are the uses of computer network technology?
Applications for Computer Networks in the Home Remote information access. Communication between people. Entertainment that is interactive. Electronic commerce is a term that refers to the sale of
What is the 802.11 protocol?
IEEE 802.11 is a collection of protocols and standards for wireless local area network (WLAN) computer communication operating at frequencies of 5, 3.6, and 2.4 GHz. The IEEE 802 or IEEE LAN/MAN Standards Committee creates and maintains them. This standard’s most recent base version is IEEE 802.11-2007.
Which type of wireless communication is based on 802.11 standards?
Wi-Fi wireless LAN requirements are defined by the IEEE 802.11 standards.
What is WLAN and its types?
WLANs operate in two main modes, infrastructure and ad hoc, as defined by IEEE 802.11. Infrastructure Mode: Mobile devices or clients connect to an access point (AP), which links to the LAN or the Internet through a bridge. The client uses the AP to send frames to other clients.
What is 802.11 a/b/g/n AC?
802.11ac is the most widely adopted Wi-Fi standard, offering fast wifi speeds on the 5GHz band. The standard is often referred to as “Wireless ac” or “Wi-Fi ac,” similar to how 802.11a/b/g/n is referred to as “Wireless a/b/g/n” or “Wi-Fi a/b/g/n.”
What is the difference between 802.11 n and 802.11 AC?
Range of 802.11ac vs. 802.11n In reality, 802.11ac operates on the 5GHz frequency, while 802.11n operates on the 5GHz and 2.4GHz bands. The higher the band, the quicker it is, yet the lower the band, the farther it travels. However, in my testing of both protocols, I discovered that the signal strength of 802.11ac over 5GHz and 802.11n over 5GHz and 2.4GHz is fairly similar.
What is the 802.11 g standard?
The 802.11g standard is an amendment to the 802.11 specification for Wireless Local Area Networks (WLANs). The Institute of Electrical and Electronics Engineers (IEEE) created 802.11g as a WLAN upgrade over its predecessor, 802.11b.
Conclusion
This Video Should Help:
The “match the protocol or encryption name with the feature.” is a question that I am unable to answer.
Related Tags
- which of the following will use an rj-11 connector for connectivity?
- you have connected a cable internet connection as shown in the exhibit.
- which of the following is a wireless internet connectivity method that utilizes cellular technology?
- you have connected an adsl internet connection as shown in the exhibit
- your company is implementing a wireless network and is concerned